This is a stand-alone unit, its input is connected to the main and its output to the supply leadwire. This power supply unit type is only used if there are up to 100 address elements in the system. Input requirements: 1+N+PE 230V/50Hz. Main power supply leadwires must be secured by a separate 6A circuit breaker. Maximal input is 250VA.
Dimensions : 350 mm x 300 mm x 95 mm
MEDBALTICA 2022
1-3 December 2022
Ķipsalas str. 8-153,
LV-1048, Riga, Latvia
Hall 2, Stand C22-D21
https://www.bt1.lv/medbaltica
Ashgabat International Centre of Internal Diseases – 5th floor Nephrology Clinic
Jūrmala Rehabilitation Center
Kiev Oberig Clinic
Kiev Clinic of Cell Therapy
Kiev Adagio Hotel Pobedy
Chisinau Children’s Hospital Nо.1
The unit is equipped with a loudspeaker for one-way loud call connection and with a connector for connection of participant´s units.
Functional options of the element:
Dimensions: 150 mm x 86 mm x 45 mm
Variant: ZLJR DIN IP – LJ bracket with loudspeaker DIN IP (110124)
This is a switch with a vintage phone cord and with integrated microphone. It is connected via a connector to ZLJR IP or KJK IP.
The device allows to send a call and establish voice communication with staff using the loudspeaker on the connected units.
Dimensions: 40x84x27 mm + cord
13-16 November 2023
Messe Düsseldorf, Germany
Hall 15, Stand No. F22
Tbilisi Health Forum 2019
8-10 November, 2019
Expo Georgia
118 Tsereteli Ave., 0119 Tbilisi, Georgia
Hall 11, stand 16
TIHE 2023
13-15 April 2022
Pavilion No.2, Stand D100
Uzexpocentre NEC, Tashkent, Uzbekistan
www.tihe.uz
AKFA Medline Tashkent – video
Tashkent Medion Clinic
Tashkent Central Military Hospital
Tashkent Republican Research Centre of Emergency Medicine – Department of Cardiology, Тransplantology and Neurosurgery – Chilanzar District
ARAB HEALTH 2023
30 Jan – 2 Feb 2023
Dubai International Convention & Exhibition Centre, UAE
Hall Z1, stand Z1.F10 & Z1.F01
1-3 October, 2019
IEC – KYIV
Ukraine
Hall 3A, stand C1-2
Dimensions : 86 mm x 150 mm x 64 mm
Dimensions : 86 mm x 86 mm x 26 mm
Dimensions : 86 mm x 150 mm x 26 mm
Dimensions : 86 mm x 86 mm x 26 mm
Dimensions : 86 mm x 150 mm x 26 mm
Dimensions : 86 mm x 150 mm x 26 mm
Dimensions : 86 mm x 150 mm x 26 mm
Dimensions : 86 mm x 86 mm x 26 mm
Dimensions : 86 mm x 86 mm x 26 mm
Dimensions : 86 mm x 86 mm x 26 mm
Dimensions : 40 mm x 84 mm x 26 mm
Dimensions : 55 mm x 95 mm x 40 mm
Dimensions : 40 mm x 84 mm x 26 mm
Dimensions : 86 mm x 86 mm x 26 mm
Dimensions : 86 mm x 86 mm x 26 mm
Dimensions : 86 mm x 86 mm x 26 mm
Dimensions : 86 mm x 86 mm x 48 mm
It is used for easier orientation of staff in the labyrinthine buildings and spaces, for optical indication of calls.
Dimensions : 86 mm x 86 mm x 48 mm
This is a stand-alone unit, its input is connected to the main and its output to the supply leadwire. This power supply unit type is only used if there are less to 100 address elements in the system. Input requirements: 1+N+PE 230V/50Hz. Main power supply leadwires must be secured by a separate 6A circuit breaker. Maximal input is 100VA.
Dimensions : 230 mm x 200 mm x 95 mm
Master station is equipped with a colour display with a touch screen. The intuitive operating concept provides high comfort for staff when using the unit.
Transmission of all client´s calls to the master station and also to all places with staff registration.
Individual calls and movement of staff are optically indicated by lights located above the doors of rooms..
If the signalling units with transmitter are installed in the rooms, it is possible to realize one-way communication towards clients called “Central Message”.
In the system it is possible to activate alarm of the highest emergency called the “Medical Alarm”.
Easy and intuitive configuration and programming of the system on master station.
The system allows control of the electric door locks. If an entrance unit is installed at the entrance, implementation of two-way talking connection with the entrance unit is possible.
In the event of a power outage all data is protected and uninterruptible power supply keeps the system running until the central backup source is started.
The system can work as one unit, or it can be divided into subsystems just by pressing the button, that work completely autonomously.
Displaying of data on clients and movement of staff on a colour graphic display with a touch screen on master station or on staff units with display.
The staff registration on registration units allows to be constantly informed about movement of staff. This information is displayed in real time on the master station and on units with display.
An option of integration with other systems used in health care facilities (fire alarm, security alarm, databases, etc.).
The element is used to create a voltage to control the electric lock. Installation in the interior only.
Functional options of the element:
Electric lock is not a part of the MediCall system supply.
Dimensions: 46 mm x 26 mm x 30 mm
RFID reader IP (CRFID IP – 110560) – electric door lock control by RFID tag.
In comparison to the Communication unit IP the element is expanded with an touch screen display which provides the user with details on current calls – exact address of call initialization, type of call, description of the calling place, the name of the calling client.
Dimensions: 130 mm x 150 mm x 27 mm
Models:
KJDD RFID IP (110201) – Communication unit with touch screen display and RFID IP
Staff terminal and Client terminal are equipped with a 12″ colour display with a touch screen that ensures the intuitive operation via pictograms. The intuitive operating concept provides high comfort for staff and clients when using the terminals.
Reliability of system operation is ensured, among other things, by self-diagnostic functions that ensure system monitoring. In case of disconnected or defective units this condition is indicated. All errors and defects are transmitted in real time, with an emphasis on their immediate removal.
The concept of system administration and maintenance is based on remote access via Internet. Remote administration allows to diagnose a defect or a problem with system operation, data maintenance, system configuration or reconfiguration. It is also possible to update or upgrade any system software.
The staff registration in the system is standardly realized by the registration buttons. This registration is anonymous without the possibility to identify medical staff. To have a control over the system operation you can choose RFID tags and readers for staff registration. This functionality allows you to identify staff individually according to the assigned tags. Also identification of different levels of staff – physicians, nurses, support staff, etc. – is possible.
In the system it is possible to activate „Blue code“, that indicates a patient requiring immediate resuscitation.
Recording and storage of all activities in the system (client calls, call connections, registrations, alarms, etc.) with the option to view them on the display unit of the staff terminal or on a PC.
An option to control TV, Venetian blinds or Internet radio by the client´s units.
In the event of a power outage all data is protected and uninterruptible power supply keeps the system running until the central backup source is started.
To protect client´s units from mechanical damage, magnetic non-destructive connectors can be used for event of strain in any direction.
The transmission of the caller ID through audio signal.
Displaying of data on clients and movement of staff on a 12“ colour graphic display with a touch screen on staff terminal.
An option of integration with other systems used in health care facilities (fire alarm, security alarm, databases, etc.).
The staff registration on registration units allows to be constantly informed about movement of staff. This information is displayed in real time on the staff terminal and on units with display, and stored with an option of back viewing.
The system allows integration of IP cameras with image transfer to the staff terminal. This functionality is very often used in combination with the entrance communication units -replacement of the door videophone.
It is used for easier orientation of staff in the labyrinthine buildings and spaces, for optical indication of calls.
Dimensions : 86 mm x 86 mm x 48 mm
In connection with the attached element optically signalizes status of a particular place.
Dimensions: 86 mm x 86 mm x 48 mm
It is used for connection of Pneumatic switch 110420 (the element consists of air ballon and a tube for diaphragm switch control in extremely humid environment or in spa / rehabilitation bathtubs. The balloon can float in water).
In connection with Signalling unit IP or Communication unit IP it enables to send emergency call to the system.
It is ususally installed above or next to a bathtub, or wherever else needed.
Dimensions: 86 mm x 86 mm x 27 mm
This element is similar to Emergency call push button IP. It is usually placed in bathrooms above bathtubs and in showers at least 2,25 m above the floor.
Dimensions: 86 mm x 86 mm x 27 mm
Models:
TANVB IP (110412) Еmergency call pull cord wireless 868 IP,
TANVB IP (110413) Еmergency call pull cord wireless 869 S IP
This element, in connection with Signalling unit IP or Communication unit IP sends emergency call to the system.
It is located usually in bathrooms and showers near toilets and washbasins.
Dimensions: 86 mm x 86 mm x 27 mm
This element, in connection with Signalling unit IP or Communication unit IP sends emergency call to the system.
It is located usually in bathrooms and showers near toilets and washbasins.
Dimensions: 86 mm x 86 mm x 27 mm
This element is installed in bathrooms and toilets which are part of the room. It is used when it is required to cancel the emergency call at the place where the call was activated.
Dimensions: 86 mm x 86 mm x 27 mm
It is used for connection of Emergency call cord IP.
Dimensions: 86 mm x 86 mm x 27 mm
Models:
ZVSB IP (110166) – Socket for call cord wireless 868 IP,
ZVSB IP (110167) – Socket for call cord wireless 869 S IP
This is a switch with a vintage phone cord. It is connected to ZVST IP, ZU IP, ZLJK IP, ZLJR IP, ZUR IP, KJ IP or KJD IP via a connector.
The switch works just as a button which makes possible to send a request for voice communication.
Dimensions: 40 mm x 84 mm x 27 mm
Variants: VSB IP – Call cord for ZVSB 868 IP (110153)
It is used for connection of Emergency call cord IP, or on a head bed unit for connection of Bedside unit IP.
Dimensions: 86 mm x 86 mm x 27 mm
Models: ZUO IP (110191) – User´s socket with lighting control IP
The bracket is used for connection of the Bedside unit IP (possibility of hanging-up) or Call cord IP via a connetor.
Dimensions: 86 mm x 150 mm x 45 mm
Models:
ZLJKE IP (110121) – LJ bracket with ethernet IP,
This element in the shape of a telephone receiver is usually placed next to a patient’s or client’s bed. It can be connected to the system in two ways: as a standard by a connector built in Bedside unit bracket with connector IP or via a connector in Extension user´s socket IP if the system is a part of bed head units. In the later case, Bedside unit bracket without connector IP is also a part of the delivery.
Features:
Dimensions:
54 mm x 200 mm x 25 mm (LJ IP)
86mm x 150mm x 45mm (ZLJK IP)
Models: LJO IP (110117) – Bedside unit with lighting control IP
This element in the shape of a telephone receiver is usually placed next to a patient’s or client’s bed. It can be connected to the system in two ways: as a standard by a connector built in Bedside unit bracket with connector IP or via a connector in Extension user´s socket IP if the system is a part of bed head units. In the later case, Bedside unit bracket without connector IP is also a part of the delivery.
The relay module provides connection between controlling device and light or other equipment.
Using LJD IP, it is possible to control the lighting on bedside unit or in the room, Relay module for lighting IP (110115) provides connection between the controlling device and light.
From the loudspeaker of LJD IP it is possible to listen to TV. For transferring sound from TV to the MDC V04 IP system TV interface IP (110160) is used.
Features:
Dimensions:
54 mm x 200 mm x 25 mm (LJD IP)
86 mm x 150 mm x 45 mm (ZLJK IP)
It is an element which includes a built-in loudspeaker for a one-way talking connection towards the client and the element also includes a connector for connection client’s elements. It is mainly used in social area where its use substantially reduces costs of the system.
Functional :
Dimensions: 72 mm x 136 mm x 42 mm
Models:
ZUR RFID IP (110142) – User´s bracket unit with loudspeaker and RFID IP,
ZURB IP (110143) – User´s bracket unit with loudspeaker wireless 868 IP
This element is installed next to the ward entrance door and is intended mainly for visitors.
Features:
Dimensions: 130 mm x 150 mm x 27 mm
Models:
VKJ RFID IP (110281) – Entrance communication unit with RFID IP
In comparison to the Communication unit IP the element is expanded with an alphanumeric display which provides the user with details on current calls – exact address of call initialization, type of call, description of the calling place, the name of the calling client.
Dimensions: 130 mm x 150 mm x 27 mm
Models:
KJD RFID IP (110320) Communication unit with display and RFID IP,
KJDB IP (110321) Communication unit with display wireless 868 IP,
KJDB RFID IP (110321) Communication unit with display wireless 868 with RFID IP,
KJDB IP (110322) Communication unit with display wireless 869 S IP,
KJDB RFID IP (110322) Communication unit with display wireless 869 S with RFID IP
Communication unit is the central unit of a bed room associating control elements of clients and staff.
Features:
Dimensions: 130 mm x 150 mm x 27 mm
Models:
KJ RFID IP (110310) Communication unit with RFID IP,
KJK IP (110311) Communication unit with connector IP,
KJB IP (110312) Communication unit wireless 868 IP,
KJB RFID IP (110312) Communication unit wireless 868 with RFID IP,
KJKB IP (110313) Communication unit with connector wireless 868 IP,
KJKB IP (110313) Communication unit with connector wireless 868 with RFID IP,
KJB IP (110314) Communication unit wireless 869 S IP,
KJB RFID IP (110314) Communication unit wireless 869 S with RFID IP
It is an element in the wall or desktop version . Calls from beds are preferentially transmitted to this unit and if they are not settled by a predetermined time, they are further transmitted to the whole system. The unit makes possible to connect up 4 wards together. It is equipped with a button of muted call.
Features:
Dimensions: 150 mm x 86 mm x 27 mm
Client terminal:
· sending a request for communication with a nurse or support staff
· loud communication with a nurse and support staff
· loud playback of announcements
· browsing web pages
· listening to an entertainment programmes
· watching TV programmes (media streamer connected)
· connection of headphones
· control of room equipment – lighting and Venetian blinds
· integration of RFID readers for staff registration and identification
Nurse mode (after registration of presence):
Dimensions : 86 mm x 150 mm x 26 mm
This element in wall-mounted design is used for devolution of the system. It is useful for example in the intensive care units or in rooms with a constant nurse supervision. Calls from these beds are preferentially transmitted only to this unit and if they are not settled by a predetermined time, they are further transmitted to the whole system.
Functional options of the element:
Dimensions:
54mm x 200mm x 28mm (phone receiver)
150 mm x 86 mm x 45 mm
This element is used in bathrooms and toilets (if these are not a part of a bed room) or in places of temporary staff presence to which acoustic signals from the system need to be redirected.
Features:
Input SBUS module IP (MV SBUS IP – 110480) provides connection between external devices (fire alarm system, etc.) and
MDCV 04 IP system. It is used wherever you need to connect an external device to switch on potential-free contact .
Socket for external device (ZEZ IP – 110481) is fully analogous to the Input SBUS module IP, it is equipped with a RJ11 connector.
Dimensions: 86 mm x 86 mm x 27 mm
Models:
SIJ RFID IP (110250) – Signalling unit with RFID IP,
SIJB IP (110251) – Signalling unit wireless 868 IP,
SIJB RFID IP (110251) – Signalling unit wireless 868 with RFID IP,
SIJB IP (110252) – Signalling unit wireless 869 S IP,
SIJB RFID IP (110252) – Signalling unit wireless 869 S with RFID IP
This element is identical to Signalling unit but features in addition an alphanumeric display which provides the user with details on current calls – exact address of call initialization, type of call, description of the calling place, the name of the calling client.
Dimensions: 86 mm x 150 mm x 27 mm
Models:
SIJD RFID IP (110260) – Signalling unit with display and RFID IP,
SIJDB IP (110261) – Signalling unit with display wireless 868 IP,
SIJDB RFID IP (110261) – Signalling unit with display wireless 868 with RFID IP,
SIJDB RFID IP (110262) – Signalling unit with display wireless 869 S with RFID IP
A source of video signal for Information monitor IP.
Dimensions: 150 mm x 86 mm x 27 mm
It is an 32″ information monitor which is usually installed in the corridor. The monitor displays information about individual calls – address of the place of call activation, type of call, caller´s name, medical alarm, presence, date/time.
The element is used for wireless emergency calls. It comes in handy especially if the patient can freely move about the room but he or she has to be able to call help at any time, for example in case of a seizure.
Dimensions: 55 mm x 45 mm x 15 mm
Models:
BTU IP (110361) – Wireless push button 868 IP on the neck,
BTU IP (110361) – Wireless push button 868 IP with clip,
BTU IP (110362) – Wireless push button 869 S IP,
BTU IP (110362) – Wireless push button 869 S IP on the neck,
BTU IP (110362) – Wireless push button 869 S IP with clip,
BTUM IP (110363) – Wireless push button 869 S IP
BTUM IP (110363) – Wireless push button 869 S multi IP on the neck,
BTUM IP (110363) – Wireless push button 869 S multi IP with clip
BTUM IP (110363) – Wireless push button 869 S multi IP
This element is used along with Bedside unit bracket with connector IP, when instead of a bedside unit only call cord is used at the client’s bed.
Dimensions: 55 mm x 95 mm x 40 mm
This element is used to hang up Bedside unit IP if the system cables terminate in bed head units.
Dimensions: 86 mm x 150 mm x 45 mm
The Ethernet socket is used as an interface for connecting of the Staff terminal IP Acrios (TP IP), Signalling staff terminal (TPS IP) desktop variant, Staff unit with display (SJD IP) desktop variant, to the system bus.
Dimensions: 86 mm x 86 mm x 27 mm
The element is used in places that are exposed to weather influences (entrance to buildings) and it is used especially by visitors. It is provided as a whole including its metal casing.
Features:
Dimensions: 135 mm x 225 mm x 75 mm
Models:
VKJV4 IP (110293) Outdoor entrance communication unit 4 IP Acrios
The unit can be expanded with CRVKJV IP (110561) – RFID Reader VKJV IP – for opening EZ
by RFID tags from the place next to VKJV2 IP.
This electronic device along with Outdoor entrance communication unit 2 IP Acrios makes up one functional whole. It is never installed outdoor but always near the outdoor entrance communication unit.
It does not contain any controls.
Dimensions: 150 mm x 86 mm x 27 mm
IP camera is used for video transmission from the requested places in the object to the Staff terminal IP Acrios, for example entrance door to the ward or building. IP camera is usually used together with Entrance communication unit IP.
Dimensions: depending upon the type
Models:
SK OUT IP (110651) – Outdoor camera set IP
SK D IP (110652) – Indoor camera set with detection IP
The wireless staff unit consists of a base station and a handset.
Base station is a part of the set, which ensures communication with the wireless handset, communication over the local area network (LAN) provided with the router (switch), and making phone calls using ATE. The range of gigaset base station is limited, up to 50 m indoors, the range is reduced when ECO mode is activated. Power supply is realized from the backbone line of the MediCall system by connection via power adapter, which is part of the set.
Handset is a receiving apparatus, providing connection with the base station. Handset charger is a part of the set.The wireless staff unit is a standart mobile phone, which is connected to the system via the base station. It can be used in staff´s rooms, or in the place of staff terminal installation. The element enables staff members movements within the range of the mobile phone while maintaining the availability of immediate care and help.
Repeater for BSJ IP (110601) is used for increasing the range of Gigaset Base station and at the same time it extends the reception range of the handsets. Within such an extended area it is possible to use all the features as on the base station.
Features:
It is the central element for control and administration of the system.
Dimensions: 119 mm x 245 mm x 245 mm
Switch 8 ports ( SW8 – 110660) is a part of delivery, for connection of each branch of the system wiring.
Uninterruptible power supply for SSV (ZZ – 110690) provides emergency power to the server when the input power source or mains power fails, and it also protects the server from overvoltage.
Data rack TRITON 19″ 6U (DR6 – 110790) for mounting multiple electronic equipment modules – server SSV IP, switch devices (data switch is a part of server supply), size of rack 6U with removable side panels, IP30 protection.
Analog/VoiP gateway IP (AVB IP – 110810) ensures the connection of the system with public telephone networks.
GSM gateway SMS IP Acrios (GSM SMS IP – 110852) ensures the connection of the MDC V04 IP system with the GSM network.
Detection gate module IP (MDB IP – 110861) monitors persons leaving the given sector or building without permission. Antenna for detection gate module IP (AMDB IP – 110862).
Pager base station (PU – 110670), Text pager (PT – 110680), Control panel of pager IP (OPP IP – 110675) – these elements ensure signal transfer from the MDC V04 IP system. The information is transmitted in text form to the Text pager.
It is a source of entertainment program (2 FM channels), which is transmitted to the system.
Dimensions: 150 mm x 86 mm x 27 mm
Installation element for the construction of the system Ethernet network.
Dimensions: 115 mm x 70mm x 15 mm
This is a stand-alone unit, its input is connected to the main and its output to the supply leadwire. Input requirements: 1+N+PE 230V/50Hz. Main power supply leadwires must be secured by a separate 6A circuit breaker.
Dimensions : 305 mm x 200 mm x 95 mm
