20-22 May 2026 Atakent International Exhibition Centre, Almaty, Kazakhstan Hall 11, Stand 11-A9 www.kihe.kz
Exhibition KIHE 2026

LJ bracket with loudspeaker IP 110125 ZLJR IP

The unit is equipped with a loudspeaker for one-way loud call connection and with a connector for connection of participant´s units.

Functional options of the element:

  • one-way loud call connection
  • connection of bedside unit for discrete (phone) call connection
  • connection of call cord with microphone for loud call connection
  • connection of call cord
  • loud listening to entertainment programs
  • loud reproduction of messages from staff terminal and staff unit with display
  • detection of raised and hanged-up handset (bedside unit)

Dimensions: 150 mm x 86 mm x 45 mm

Variant:
ZLJR DIN IP (110124) – LJ bracket  with loudspeaker DIN IP
ZLJRO IP (110126) – LJR bracket with lighting control IP

Call cord with microphone IP 110152 VSM IP

This is a switch with a vintage phone cord and with integrated microphone. It is connected via a connector to ZLJR IP  or KJK IP.
The device allows to send a call and establish voice communication with staff using the loudspeaker on the connected units.

Dimensions: 40x84x27 mm + cord

Call cord bracket 102320 ZVS

  • used to suspend the emergency call cord

Dimensions : 55 mm x 95 mm x 40 mm

 

Electric lock controller IP 110470 OEZ IP

The element is used to create a voltage to control the electric lock. Installation in the interior only.

Functional options of the element:

  • an option to set up input voltage of the electric lock 6 V/9 V/12 V
  • set up for used type of electric lock (inactiv closed/open)
  • set up AC/DC

Electric lock is not a part of the MediCall system supply.

Dimensions: 46 mm x 26 mm x 30 mm

CRFID IP (110560) – RFID reader IP electric door lock control by RFID tag

Staff unit Smartphone IP Android IP 110620 SJS IP

Dimensions: 80 mm x 170 mm x 10 mm

 

Direction lamp with buzzer IP 110451 SVS IP

It is used for easier orientation of staff in the labyrinthine buildings and spaces, for optical indication of calls.

Dimensions : 86 mm x 86 mm x 48 mm

 

Lamp IP 110441 SV IP

In connection with the attached element optically signalizes status of a particular place.

Dimensions: 86 mm x 86 mm x 48 mm

 

Socket for pneumatic switch IP 110430 ZPS IP

It is used  for connection of Pneumatic switch 110420 (the element consists of air ballon and a tube for diaphragm switch control in extremely humid environment or in spa / rehabilitation bathtubs. The balloon can float in water).

In connection with Signalling unit IP or Communication unit IP  it enables to send  emergency call to the system.

It is ususally installed above or next to a bathtub, or wherever else needed.

Dimensions: 86 mm x 86 mm x 27 mm

Emergency call pull cord IP 110410 TANV IP

This element is similar to Emergency call push button IP. It is usually placed in bathrooms above bathtubs and in showers at least 2,25 m above the floor.

Dimensions: 86 mm x 86 mm x 27 mm

Models:
TANVB IP (110412) Еmergency call pull cord wireless 868 IP,
TANVB IP (110413) Еmergency call pull cord wireless 869 S IP

Emergency call push button IP 110400 TNV IP

This element, in connection with Signalling unit IP or Communication unit IP sends emergency call to the system.

It is located usually in bathrooms and showers near toilets and washbasins.

Dimensions: 86 mm x 86 mm x 27 mm

Models:
TNVB IP (110414) Emergency call push button wireless IP,

Emergency call pull cord with push button IP 110411 TTNV IP

This element, in connection with Signalling unit IP or Communication unit IP sends emergency call to the system.

It is located usually in bathrooms and showers near toilets and washbasins.

Dimensions: 86 mm x 86 mm x 27 mm

Models:
TTNVB IP (110415) Emergency call pull cord with push button wireless IP

Call and cancel button IP 110820 VRT IP

This element is installed in bathrooms and toilets which are part of the room. It is used when it is required to cancel the emergency call at the place where the call was activated.

Dimensions: 86 mm x 86 mm x 27 mm

Socket for call cord with push button IP 110165 ZVST IP

It is used for connection of Emergency call cord IP.

Dimensions: 86 mm x 86 mm x 27 mm

Models:
ZVSB IP (110166) – Socket for call cord wireless 868 IP,
ZVSB IP (110167) – Socket for call cord wireless 869 S IP

Call cord IP 110150 VS IP

This is a switch with a vintage phone cord. It is connected to ZVST IP, ZU IP, ZLJK IP, ZLJR IP, ZUR IP, KJ IP or KJD IP via a connector.

The switch works just as a button which makes possible to send a request for voice communication.

Dimensions: 40 mm x 84 mm x 27 mm

Variants: VSB IP (110153) – Call cord for ZVSB 868 IP

User’s socket IP 110190 ZU IP

It is used for connection of Emergency call cord IP,  or on a head bed unit for connection of Bedside unit IP.

Dimensions: 86 mm x 86 mm x 27 mm

Models: ZUO IP (110191) – User´s socket with lighting control IP

LJ bracket with connector IP 110123 ZLJK IP

The bracket is used for connection of the Bedside unit IP (possibility of hanging-up) or Call cord IP via a connetor.

Dimensions: 86 mm x 150 mm x 45 mm

Models:
ZLJKE IP (110121) – LJ bracket with ethernet IP,

Bedside unit IP 110116 LJ IP

This element in the shape of a telephone receiver is usually placed next to a patient’s or client’s bed. It can be connected to the system in two ways: as a standard by a connector built in Bedside unit bracket with connector IP or via a connector in Extension user´s socket IP if the system is a part of bed head units. In the later case, Bedside unit bracket without connector IP is also a part of the delivery.

Features:

  • sending a request and making a call
  • listening to two entertainment programmes of choice
  • volume control for entertainment programmes
  • making phonecalls
  • acceptance of incoming phonecalls from ATE

Dimensions:
54 mm x 200 mm x 25 mm (LJ IP)
86mm x 150mm x 45mm (ZLJK IP)

Models:
LJA IP (110118) – Bedside unit with accelerometer IP
LJO IP (110117) – Bedside unit with lighting control IP
LJS IP (110119) – Bedside unit with capacitive sensor IP
LJOA IP (110101) – Bedside unit with lighting control and accelerometer IP

Bedside unit with display IP 110100 LJD IP

This element in the shape of a telephone receiver is usually placed next to a patient’s or client’s bed. It can be connected to the system in two ways: as a standard by a connector built in Bedside unit bracket with connector IP or via a connector in Extension user´s socket IP if the system is a part of bed head units. In the later case, Bedside unit bracket without connector IP is also a part of the delivery.

The relay module provides connection between controlling device and light or other equipment.

Using LJD IP, it is possible to control the lighting on bedside unit or in the room, Relay module for lighting IP (110115) provides connection between the controlling device and light.

From the loudspeaker of LJD IP it is possible to listen to TV. For transferring sound from TV to the MDC V04 IP system TV interface IP (110160) is used.

Features:

  • sending a request and making a call
  • listening to two entertainment programmes of choice
  • volume control for entertainment programmes
  • display with date, time, entertainment programme
  • making phonecalls
  • acceptance of incoming phonecalls from ATE

Dimensions:
54 mm x 200 mm x 25 mm (LJD IP)
86 mm x 150 mm x 45 mm (ZLJK IP)

User´s bracket unit with loudspeaker IP 110142 ZUR IP

It is an element which includes a built-in loudspeaker for a one-way talking connection towards the client and the element also includes a connector for connection client’s elements. It is mainly used in social area where its use substantially reduces costs of the system.

Functional :

  • loud one-way connection
  • an option to connect a participant’s handset for a discrete two-way talking connection via a connector
  • an option to connect different types of call cords via a connector
  • connection of push-buttons and pull cords of emergency call
  • loud playback of news from the staff terminal to beds, rooms or within a central announcement to the whole ward
  • registration of staff members
  • listening and volume control of entertainment programme
  • control of the optical signalling lamp

Dimensions: 72 mm x 136 mm x 42 mm

Models:
ZUR RFID IP (110142) – User´s bracket unit with loudspeaker and RFID IP,
ZURB IP (110143) – User´s bracket unit with loudspeaker wireless 868 IP

Entrance communication unit IP 110281 VKJ IP

This element is installed next to the ward entrance door and is intended mainly for visitors.

Features:

  • sending a request for communication with staff members
  • voice communication

Dimensions: 130 mm x 150 mm x 27 mm

Models:
VKJ RFID IP (110281) – Entrance communication unit with RFID IP

Communication unit with display IP 110350 KJD IP

In comparison to the Communication unit IP the element is expanded with an alphanumeric display which provides the user with details on current calls – exact address of call initialization, type of call, description of the calling place, the name of the calling client.

Dimensions: 130 mm x 150 mm x 27 mm

Models:
KJD RFID IP (110350) Communication unit with display and RFID IP,
KJDB IP (110351) Communication unit with display wireless IP,
KJDB RFID IP (110351) Communication unit with display wireless with RFID IP,
KJDB IP 869 (110352) Communication unit with display wireless 869 S IP,
KJDB RFID IP 869 (110352) Communication unit with display wireless 869 S with RFID IP

Communication unit IP 110340 KJ IP

Communication unit is the central unit of a bed room associating control elements of clients and staff.

Features:

  • selection of nurse registration (push-button, tag)
  • an option to control the electric lock of the entrance door
  • transmitting requests for establishing a connection with the nurse
  • loud communication connection with staff
  • an option to connect the telephone handset for a discrete connection via the connector of the communication unit (version with connector)
  • connection of call cord via the connector of the communication unit (version with connector)
  • listening to diverting programmes with volume control
  • acceptance of telephone calls from public telephone network
  • reception of calls from systems in the combined operation with the option of mutual communication
  • nurse presence registration
  • staff alarm initialization
  • connection of emergency call push-buttons and pull cords via SBUS
  • loud playback of announcements from the staff terminal. The announcements can be directed to a selected room or to all rooms in the ward
  • acoustic signalization of incoming calls from other points in the system or in other systems (if they are combined)
  • control of the optical signalling lamp
  • an option to implement internal wireless receiver module

Dimensions: 130 mm x 150 mm x 27 mm

Models:
KJ RFID IP (110340) Communication unit with RFID IP,
KJB IP (110342) Communication unit wireless IP,
KJB RFID IP (110342) Communication unit wireless with RFID IP,
KJB IP 869 (110343) Communication unit wireless 869 S IP,
KJB RFID IP 869 (110343) Communication unit wireless 869 S with RFID IP,
KJK IP (110311) Communication unit with connector IP,
KJKB IP (110313) Communication unit with connector wireless 868 IP,
KJKB IP (110313) Communication unit with connector wireless 868 with RFID IP,

Signalling staff terminal IP 110230 TPS IP

 

It is an element in the wall or desktop version . Calls from beds are preferentially transmitted to this unit and if they are not settled by a predetermined time, they are further transmitted to the whole system. The unit makes possible to connect up 4 wards together.  It is equipped with a button of muted call.

Features:

  • option to unit wards
  • independent registration for every system
  • interception of alarms from individual systems
  • identification of the calling person on an alphanumeric display unit
  • muted calls

Dimensions: 150 mm x 86 mm x 27 mm

Communication terminal 10″ IP 110202 KT10 IP

 

Staff terminal IP Acrios 110015 TP IP

This staff element provides control, monitoring, configuration and administration of the whole system. It is connected to the system through the Ethernet socket (ZE IP).

Features:

  • acoustic and optical signalization of individual calls
  • calling address visualization
  • client’s data visualization, staff movement visualization
  • electrical door lock control
  • decentralization of the system into the smaller logical units
  • user friendly via touch screen
  • reception of client’s calls and alarms and an option of its cancellation
  • choice of diverting programmes
  • client´s names editing
  • viewing of cameras installed in the system
  • choice of the client according to the room or the name and realization of the connection with the client
  • update of staff terminal IP via USB flash drive or from the Internet
  • staff registration on TP RFID IP using RFID tag
  • loud listening to the diverting programmes on TP IP
  • the possibility of implementation of any number of TP IP within the system

Dimensions: 360 mm x 250 mm x 120 mm

Models:
TP N IP (110016) – Wall staff terminal IP Acrios – wall mounting,
TP RFID IP (110015) – Staff terminal with RFID IP Acrios,
TP RFID N (110016) – Wall staff terminal with RFID IP Acrios – wall mounting

For the TP IP version with RFID module, RFID TAG (110500, 110501) is used for staff registration

Possibility of amplifying the power supply by Power adapter TP (ATP 110871) via the ZE IP element.

 

Staff unit with display IP 110331 SJD IP

This element in wall-mounted design is used for devolution of the system. It is useful for example in the intensive care units or in rooms with a constant nurse supervision. Calls from these beds are preferentially transmitted only to this unit and if they are not settled by a predetermined time, they are further transmitted to the whole system.

Functional options of the element:

  • variants for a doctor or for a nurse (configuration via the staff terminal)
  • connection to up to several stand-alone systems
  • separate registration for each system
  • sending request for voice communication to each system
  • alarm receiving from each system with the option to start voice communication
  • voice connection with all communication elements within the system or combined operation of systems
  • control of entrance door electrical lock
  • identification of incoming calls on display

Dimensions:
54mm x 200mm x 28mm (phone receiver)
150 mm x 86 mm x 45 mm

Signalling unit IP 110250 SIJ IP

This element is used in bathrooms and toilets (if these are not a part of a bed room) or in places of temporary staff presence to which acoustic signals from the system need to be redirected.

Features:

  • emergency call initialization
  • staff registration
  • alarm initialization
  • connection of any number of emergency call push buttons and pull cords
  • acoustic signals redirection if staff is registered

 

Input SBUS module IP (MV SBUS IP – 110480) provides connection between external devices (fire alarm system, etc.) and
MDCV 04 IP system. It is used wherever you need to connect an external device to switch on potential-free contact .

Socket for external device (ZEZ IP – 110481) is fully analogous to the Input SBUS module IP, it is equipped with a RJ11 connector.

Dimensions: 86 mm x 86 mm x 27 mm

Models:
SIJ RFID IP (110250) – Signalling unit with RFID IP,
SIJB IP (110251) – Signalling unit wireless 868 IP,
SIJB RFID IP (110251) – Signalling unit wireless 868 with RFID IP,
SIJB IP (110252) – Signalling unit wireless 869 S IP,
SIJB RFID IP (110252) – Signalling unit wireless 869 S with RFID IP

Signalling unit with display IP 110260 SIJD IP

This element is identical to Signalling unit but features in addition an alphanumeric display which provides the user with details on current calls – exact address of call initialization, type of call, description of the calling place, the name of the calling client.

Dimensions: 86 mm x 150 mm x 27 mm

Models:
SIJD RFID IP  (110260) – Signalling unit with display and RFID IP, 
SIJDB IP (110261) – Signalling unit with display wireless 868 IP,
SIJDB RFID IP (110261) – Signalling unit with display wireless 868 with RFID IP, 
SIJDB RFID IP (110262) – Signalling unit with display wireless 869 S with RFID IP

Interface for information monitor IP 110540 IIM IP

A source of video signal for Information monitor IP.

Dimensions: 150 mm x 86 mm x 27 mm

Information monitor 32″ 110550 IM

It is an 32″ information monitor which is usually installed in the corridor. The monitor displays information about individual calls – address of the place of call activation, type of call, caller´s name, medical alarm,  presence, date/time.

 

Wireless push button 868 IP 110361 BTU IP

The element is used for wireless emergency calls. It comes in handy especially if the patient can freely move about the room but he or she has to be able to call help at any time, for example in case of a seizure.

Dimensions: 55 mm x 45 mm x 15 mm

Models:

BTU IP (110361) – Wireless push button 868 IP on the neck,
BTU IP (110361) – Wireless push button 868 IP with clip,
BTU IP (110362) – Wireless push button 869 S IP,
BTU IP (110362) – Wireless push button 869 S IP on the neck,
BTU IP (110362) – Wireless push button 869 S IP with clip,
BTUM IP (110363) – Wireless push button 869 S IP
BTUM IP (110363) – Wireless push button 869 S multi IP on the neck,
BTUM IP (110363) – Wireless push button 869 S multi IP with clip
BTUM IP (110363) – Wireless push button 869 S multi IP

Call cord bracket for ZLJ 109500 ZVSZ

This element is used along with Bedside unit bracket with connector IP, when instead of a bedside unit only call cord is used at the client’s bed.

Dimensions: 55 mm x 95 mm x 40 mm

 

LJ bracket without connector IP 110131 ZLJ IP

This element is used to hang up Bedside unit IP if the system cables terminate in bed head units.

Dimensions: 86 mm x 150 mm x 45 mm

 

Ethernet socket IP 110030 ZE IP

The Ethernet socket is used as an interface for connecting of the Staff terminal IP Acrios (TP IP), Signalling staff terminal (TPS IP) desktop variant, Staff unit with display (SJD IP) desktop variant, to the system bus.

Dimensions: 86 mm x 86 mm x 27 mm

 

Outdoor entrance communication unit 2 IP Acrios 110294 VKJV2 IP

The element is used in places that are exposed to weather influences (entrance to buildings) and it is used especially by visitors. It is provided as a whole including its metal casing.

Features:

  • sending a request for communication with staff
  • voice communication

Dimensions: 135 mm x 225 mm x 75 mm

Models:
VKJV4 IP (110293) Outdoor entrance communication unit 4 IP Acrios
VKJV6 IP (110295) Outdoor entrance communication unit 6 IP Acrios

The unit can be expanded with CRVKJV IP (110561) – RFID Reader VKJV IP – for opening EZ
by RFID tags from the place next to VKJV2 IP.

VKJV adaptor IP Acrios 110303 AVKJV IP

This electronic device along with Outdoor entrance communication unit 2 IP Acrios makes up one functional whole. It is never installed outdoor but always near the outdoor entrance communication unit.

It does not contain any controls.

Dimensions: 150 mm x 86 mm x 27 mm

 

Indoor camera set IP 110650 SK IN IP

IP camera is used for video transmission from the requested places in the object to the Staff terminal IP Acrios, for example entrance door to the ward or building. IP camera is usually used together with Entrance communication unit IP.

Dimensions: depending upon the type

Models:
SK OUT IP (110651) – Outdoor camera set IP
SK D IP (110652) – Indoor camera set with detection IP

Wireless staff unit IP 110600 BSJ IP

The wireless staff unit consists of a base station and a handset.

Base station is a part of the set, which ensures communication with the wireless handset, communication over the local area network (LAN) provided with the router (switch), and making phone calls using ATE. The range of gigaset base station is limited, up to 50 m indoors, the range is reduced when ECO mode is activated. Power supply is realized from the backbone line of the MediCall system by connection via power adapter, which is part of the set.

Handset is a receiving apparatus, providing connection with the base station. Handset charger is a part of the set.The wireless staff unit is a standart mobile phone, which is connected to the system via the base station. It can be used in staff´s rooms, or in the place of staff terminal installation. The element enables staff members movements within the range of the mobile phone  while maintaining the availability of immediate care and help.

Repeater for BSJ IP (110601)  is used for increasing the range of Gigaset Base station and at the same time it extends the reception range of the handsets. Within such an extended area it is possible to use all the features as on the base station.

Features:

  • variants for a doctor or for a nurse
  • connection to several systems
  • separate registration for each system
  • sending request for talking connection to each system
  • alarm receiving from each system with the option to start voice communication
  • voice connection with all communication elements within the system or combined operation of systems
  • simultaneous direct connection to ATE

Management centre VoIP Acrios 110041 SSV IP

It is the central element for control and administration of the system.

Dimensions: 119 mm x 245 mm x 245 mm

Switch 8 ports ( SW8 – 110660) is a part of delivery, for connection of  each branch of the system wiring.

Uninterruptible power supply for SSV  (ZZ – 110690) provides emergency power to the server when the input power source or mains power fails, and it also protects the server from overvoltage.

Data rack TRITON 19″ 6U (DR6 – 110790) for mounting multiple electronic equipment modules – server SSV IP, switch devices (data switch is a part of server supply), size of rack  6U with removable side panels, IP30 protection.

Analog/VoiP gateway IP (AVB IP – 110810) ensures the connection of the system with public telephone networks.

GSM gateway SMS IP Acrios (GSM SMS IP – 110852) ensures the connection of the MDC V04 IP system with the GSM network.

Detection gate module IP (MDB IP – 110861) monitors persons leaving the given sector or building without permission. Antenna for detection gate module IP (AMDB IP – 110862).

Pager base station (PU – 110670), Text pager (PT – 110680), Control panel of pager IP  (OPP IP – 110675) – these elements ensure signal transfer from the MDC V04 IP system. The information is transmitted in text form to the Text pager.

 

 

 

 

Audio program module IP 110520 MAP IP

It is a source of entertainment program (2 FM channels), which is transmitted to the system.

Dimensions: 150 mm x 86 mm x 27 mm

 

Switch module ZPT IP 110640 SM IP

Installation element for the construction of the system Ethernet network.

Dimensions: 115 mm x 70mm x 15 mm

Power supply unit 350W 24V 110091 N350 IP

This is a stand-alone unit, its input is connected to the main and its output to the supply leadwire. Input requirements: 1+N+PE 230V/50Hz. Main power supply leadwires must be secured by a separate 6A circuit breaker.

Dimensions : 305 mm x 200 mm x 95 mm

 

Contact

ZPT Vigantice spol. s r.o.

Vigantice 266
756 61
Rožnov pod Radhoštěm
Czech Republic

VAT: CZ48396044

+ 420 571 757 330

 

Certificates

 

 


ZPT Vigantice, s.r.o. | All rights reserved | login